Jonathan Gladin

PSX 20190107 190600.jpg

Dr. Jonathan Gladin

Division Chief, Propulsion and Energy
Research Engineer II
Aerospace Systems Design Laboratory (ASDL)
Daniel Guggenheim School of Aerospace Engineering
270 Ferst Drive, NW
Atlanta, Georgia 30332-0150 U.S.A.
Office: Weber SST 312
Phone: 404-894-5788
Email: jgladin3@gatech.edu
LinkedIn Profile
ResearchGate Profile

Education

  • B.Sc., Aerospace Engineering, 2006, Georgia Institute of Technology, USA
  • M.Sc., Aerospace Engineering, 2011, Georgia Institute of Technology, USA
  • Ph.D., Aerospace Engineering, 2015, Georgia Institute of Technology, USA

Publications and Conference Proceedings

(1) Kestner, B. K., Schutte, J., Gladin, J., and Mavris, D. N., “Ultra High Bypass Ratio Engine Sizing and Cycle Selection Study for a Subsonic Commercial Aircraft in the N+2 Timeframe," Proc. of ASME Turbo Expo, GT2011-45370, Vancouver, British Columbia, Canada, 2011.
(2) Sands, J., Gladin, J., Kestner, B., and Mavris, D. N., “Effects of Boundary Layer Ingesting (BLI) Propulsion Systems on Engine Cycle Selection and HWB Vehicle Sizing," AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Nashville, TN, 2011.
(3) Sands, J. S., Gladin, J. C., Kestner, B. K., Mavris, D. N., 2012, “Hybrid Wing Body Engine Cycle Design Exploration for Boundary Layer Ingesting (BLI) Propulsion Systems Under Design Uncertainty,”Proceedings of the 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA, Atlanta, GA.
(4) Gladin, J., Kestner, B.K., Schutte, J., and Mavris, D. N., “Engine Design Strategy for Boundary Layer Ingesting Propulsion System with Multiple Non-Symmetric Engine Inlet Conditions,” Proc. Of ASME Turbo Expo, GT2013-95905, San Antonio, Texas, USA, 2013
(5) Denney, R., Gladin, J., Tai, J., and Mavris, D.N., “Propulsion Systems Modeling with Vehicle Sketch Pad,” Proceedings of the 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Grapevine, TX, 2013
(6) Pokhrel, M., Gladin, J. C., Ali, K., Collins, K., and Mavris, D. N., “Modeling and Requirements Definition for a Hybrid-Electric Powered Helicopter,” Proc. Of AHS Sustainability 2015, Montreal, Quebec, Canada
(7) Gladin, J. , “A Sizing and Vehicle Matching Methodology for Boundary Layer Ingesting Propulsion Systems,” Ph.D. Thesis, Georgia Institute of Technology, 2015
(8) Pokhrel, M., Gladin, J., Garcia, E., and Mavris, D. N., “A Methodology for Quantifying Distortion Impacts Using a Modified Parallel Compressor Theory”, Proceedings of the ASME Turbo Expo 2018
(9) J. Gladin, D. Trawick, C. Perullo, J. Tai and D. N. Mavris, “Modeling and Design of a Partially Electric Distributed Aircraft Propulsion System with GT-HEAT," in AIAA Science and Technology Forum and Exposition , Grapevine, Texas, 2017
(10) J. Gladin, C. Perullo, J. Tai and D. N. Mavris, "A Parametric Study of Hybrid Electric Gas Turbine Propulsion as a Function of Aircraft Size Class and Technology Level," in AIAA Science and Technology Forum and Exposition , Grapevine, Texas, 2017
(11) Mingxuan Shi, Manish Pokhrel, Jonathan C. Gladin, Elena Garcia, and Dimitri N. Mavris. "Convergent Nozzle Gross Thrust Coefficient and Discharge Coefficient Calculation with Boundary Layer Ingestion (BLI) Effects", 53rd AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum, (AIAA 2017-5057)
(12) Mingxuan Shi, Konstantinos Milios, Jonathan C. Gladin, and Dimitri N. Mavris. "System-Level Study of Different Super/Turbocharger Architectures for Rotorcraft Diesel Engine", 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, (AIAA 2018-2027)
(13) Pokhrel M, Gladin J, Garcia E, Mavris DN. A Methodology for Quantifying Distortion Impacts Using a Modified Parallel Compressor Theory. ASME. Turbo Expo: Power for Land, Sea, and Air, Volume 1: Aircraft Engine; Fans and Blowers; Marine ():V001T01A038. doi:10.1115/GT2018-77089.
(14) Anusha Harish, Jonathan Gladin, and Dimitri N. Mavris. "Architecture Evaluation of a Single-aisle Turboelectric Aircraft with One Engine Inoperative Considerations", 2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum, (AIAA 2018-3838)
(15) Mingxuan Shi, Manish Pokhrel, Jonathan Gladin, Elena Garcia, and Dimitri N. Mavris. "Model Fidelity Requirements in Boundary Layer Ingestion Propulsion System Conceptual Design", 2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum, (AIAA 2018-3835)
(16) Jonathan C. Gladin, David Trawick, Dimitri N. Mavris, Michael J. Armstrong, Dwayne Bevis, and Kyle Klein. "Fundamentals of Parallel Hybrid Turbofan Mission Analysis with Application to the Electrically Variable Engine", 2018 AIAA/IEEE Electric Aircraft Technologies Symposium, AIAA Propulsion and Energy Forum, (AIAA 2018-5024)
(17) Manish Pokhrel, Mingxuan Shi, Jai Ahuja, Jonathan Gladin, and Dimitri N. Mavris. "Conceptual Design of a BLI Propulsor Capturing Aero-Propulsive Coupling and Distortion Impacts", AIAA Scitech 2019 Forum, AIAA SciTech Forum, (AIAA 2019-1588)
(18) Mingxuan Shi, Manish Pokhrel, Jonathan C. Gladin, Elena Garcia, and Dimitri N. Mavris. "Modeling Fidelity Requirements of Mission-Level Analysis on Boundary Layer Ingestion Propulsion System", AIAA Scitech 2019 Forum, AIAA SciTech Forum, (AIAA 2019-1590)